Outdoor Infrared Patio Heater – Heat Tube Trio – DEGUK-EXT-001

£2499

Product Code: DEGUK-EXT-001

  • Delivery: 20 days

  • 1800W
  • Heated area from 3 to 6 m²
  • 8 minutes
  • Up to 3 metres

Share this item with a friend

Email

Description

Description Outdoor Electric Infrared Patio Heater 1800W
Type Triple combo : 2 lateral heating tubes (2 x 900 watts) + 1 central light tube Led Titan (40 watts), energy class A
Use Outdoor heating (covered or sheltered from the wind otherwise it can reduce its performances) : verandas, patios, terraces, winter gardens, historic buildings, balconies and porches, pergolas, wellness or spa, summer lounges, etc
Heating Power Heating power* = Consumption = Max power output = 1800W. Instant heat and maximum power in 8 minutes.

Radiation efficiency 74% ! 3 adjustable power levels (mini, intermediate, max)

Heating Radiation Radiation angle of 80° thanks to 2 heating tubes oriented at 30° in opposition. Allowing a heat halo.
Heating Volume Heats about 4-5 m² up to 3-4 meters of distance (height). Reduced if subjected to drafts. Please note that in exposed areas with wind the infrared spread may be reduced by 1/3 to 1/2.
Advantages Heat obtained very quickly, very efficient energy transfer thanks to the high temperature of the heat emitter (1100°C for the filament), the area of heat feeling well defined and directional, low light emission by the heat emitter, simple and elegant design, reliability!

ideal for heating little spaces efficiently

Technology Electric infrared heater for outdoor (carbon-based technology)
Material Aluminum, titanium color
Dimensions Tube length : 95 cm, tube diameter : 5.5 cm
Light Tube
1 LED Tube (low consumption) of which the intensity (brightness 30%-100%) and the temperature of the color can be adjusted by the remote control (cold white 5000-5600 Kelvin, Warm white 2750-3500 Kelvin, and mixture of both). CRI < 80%
Weight 6 kg (heater) – 1.8 kg (Led tube)
Attachement Suspended (ideal height between 2.1 mètres to 2.5 meters). 1 cord suspension kit by steel cable is included (adjustable length 1.5 meter). For other attachment solutions (joint, mounting plates, ceiling suspension, etc.) please contact us.
Mounting Fast and easy. Simple and quick. Installation Manual supplied (english).
Electrical connection
Minimum power requirement: 8A, 230V, 50Hz. Cable 2 ml to be connected to the network (without socket 3 x 1.5 mm2)
Monitoring system
Without remote control by default. Only power switch. See available options.
Warranty 2-years. After sale conducted in the UK
Maintenance None. Tubes (available) to be replaced depending on use (approximately 2 years).
Origin 100% made in Germany.
Security IP4x, class 1, CE, TÜV, GS, ROHS
Delivery time
3 weeks
  • Certificates

Why choose DEGXEL infrared heating technology?

See the principle of infrared heating. The advantages of heating by infrared radiation are many. The mastery of our infrared technology (based on a unique radiant emitter) combined with an innovative design and high-end materials ensures reliability, low energy consumption and durability.  Last year we saved about 3300 Megawatts-hours (MW.h) to our customers! The DEGXEL heaters offer a soft and comfortable warmth for a consumption of 50-55 W per m2 (on average). This means that with our radiators you will need less power (to heat the same volume) than with conventional electric heaters (90 to 130 w / m2 most often). We will offer you a 750 W when you use a 1500 W! It is the low consumption.

  • Video Presentation

Options

These options will be offered after adding your heater to the shopping cart

  • Temperature Management

Our infrared heating is intended for covered outdoor (and sheltered from the wind which can reduce its performances) : verandas, patios, terraces, winter gardens, historic buildings, balconies and porches, pergolas, wellness or spa, summer lounges, etc. It is also quite suitable for bathrooms in which to obtain a very quick and punctual increase of temperature is desired. Finally, it is also used by professionals who need to heat a defined area.

chauffage infrarouge exterieur

The ideal positioning of the infrared heater is located above the area to heat at 2-2.5 meters approximately. Also, when installing your device you need to think about the control system. This can be controled by any wired or wireless temperature management system. By default, the infrared heating does not have any temperature management system (only a ON/OFF button). Indeed, customer requests may vary according to their needs and existing circumstances. Therefore, you may decide to acquire a control system on our site (see options below) or to set up a solution of your choice.

Heating-radiation outdoor heater

Setting up a control or temperature management system helps to reduce your consumption while creating a pleasant and relaxing atmosphere.

  • Control pack n° 2: 1 Wireless Receiver + 1 wireless Thermostat – DEGUK-PACK2

£149 inc. VAT (1 Wireless switching receiver + 1 Wireless Thermostat = control 1 heater)

DEGUK-PACK2

1 Wireless Switch Receiver + 1 thermostat

Composition of the pack:

  • 1 Wireless Switch Receiver (dimensions l = 51 mm x L = 48 mm x h = 28 mm) to be placed in the electrical socket (from which the facade has been removed) and to be connected to the radiator and the power supply. 1 receiver per radiator.
  • 1 Wireless Thermostat (battery operated) to be placed where you want it in the room. Learn more about the ideal room thermostat location). 1 Thermostat can control as many radiators as desired in the same area (1 zone = 1 room in general).

Advantages :

  • Aesthetics (The radio receiver is concealed behind the radiator in the electrical socket = the radiator cable is not visible).
  • Thermal comfort (the temperature is measured in the living area and not on the heat emitter). The installation is very simple and fast to realize. The control of the thermostat is immediate. Find out more

  • Wireless remote control – DEGUK-EXTREMOTE1

£109 inc. VAT (1 Remote control)

DEGUK-EXTPACK3

télécommande pour chauffage infrarouge

  • Control your Heat tube outdoor infrared heater.
  • The wireless remote control sends the orders to the heater (onboard receiver). Distance: up to 30 meters.
  • Advantage: you don’t need to install a wired cable to control your heater.
  • Functions :
    • HEATING: On/Off, 3 heating intensity (mini, medium, max).
    • LED: Brightness (30%-100%) and the temperature of the color can be adjusted by the remote control (cold white 5000-5600 Kelvin, Warm white 2750-3500 Kelvin, and mixture of both).  Read more.
  • Do you need help?

Wiring the heater must be connected in accordance with the relevant national electrical safety standards. For a discreet fitting (i.e. with all wires and sockets hidden), you may prefer to have the heater hardwired by a qualified professional? If so wished, we will be happy to put you in touch within your area (without any guarantee that the installation will be performed within a specific period). Please note that a standard complete installation (heater mouting + wiring) can be performed in less than 1h by any professional without any specific knowledge.

  • These options will be offered after adding your heater to the shopping cart

SEE PHOTO GALLERY